Guangzhou Zhenroumei Chemical Coatings Limited

MARSIDE Series Product Name/Model：F600-Plastic Primer Characteristic: Single-component transparent fast drying primer, used to promote adhesion of paint system to plastic parts. Substrates Plastic parts, such as PP, PA, PE. Surface Cleaning Remove wax, silicon and other contaminations with degreaser, sanding with P600-P800, wash with clean water then keep dry; again with degreaser. Coating 2 coats, total 4-5um Re-coat   At 25°C, 5-10 minutes between two coats. Spray Gun Set Up Gravity Feed: 1.2-1.5mm 4-5kg/cm² Suction Feed: 1.4-1.6mm 4-5kg/cm² Spray Technology Coats&Thickness: 2-3 coats, total 4-5um. Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature and paint film. Shelf Life   2 years in original sealed can, cool and dry place at 20℃. Package  1L×12 Note: 1. The products are ready for use. 2. It is recommended not to spray thickly to avoild peeling off. 3. Test is recommended before application due to the variety of plastic parts.